News

Corrosion resistance ensures a service life of over 30 years. The copper layer shows no peeling after undergoing a 300°C rapid cooling test.

The manufacturing of copper-clad steel grounding electrodes primarily employs either electroplating or a cold-rolling/hot-drawing process;

The outer material of a copper-clad steel grounding electrode plays several important roles.

Before use, verify that the power strip is reliably grounded.

Surge-protected power strips are primarily designed to provide lightning and over-voltage protection for electrical appliances connected to low-vol...

Surge-protected power strips typically feature built-in fail-safe circuits—such as thermal and overcurrent protection—designed to operate without i...

Instantaneous potential differences between pieces of equipment exceeding insulation strength, causing dielectric breakdown and damage;

The selection of equipotential bonding connectors requires comprehensive consideration of grounding system capacity, application scenarios, technic...

The installation and deployment of equipotential bonding connectors must comply with relevant industry standards, such as GB 50057 and IEC 62305.

The primary function of an equipotential bonding connector is to facilitate and ensure an equipotential state among various conductive components w...

Resistivity is a key parameter. Lower resistivity indicates superior electrical conductivity, facilitating the rapid dissipation of current.

Excellent Electrical Conductivity: Graphite is a highly conductive material.